BMW S 1000 RR Rider's Manual page 213

ATTENTION
Incorrect spacing between
the sensor ring and wheel
speed sensor caused by
poorly aligned threaded
bushing in the front
suspension
Damage to the wheel speed
sensor. ABS malfunction
The left clamp fixes the
threaded bushing in position
and must not be loosened
or removed.
Loosen clamping bolts 2.
Remove the quick-release
axle 1 while supporting the
wheel.
Roll the front wheel forward
to remove it.
Installing the front wheel
WARNING
Use of a wheel which does
not comply with series spec-
ifications
Malfunctions during control
interventions by ABS and
DTC
Please see the information
on the effect of wheel sizes
on the ABS and DTC chassis
control systems at the be-
ginning of this chapter.
ATTENTION
Tightening screw connec-
tions with incorrect tighten-
ing torque
Damage to or loosening of
screw connections
Have the tightening torques
checked by a repair shop,
preferably by an authorized
BMW Motorrad dealer.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction
arrows on tire or rim.
207