BMW S 1000 RR Rider's Manual page 38

32 DISPLAYS
White: (---) There is no valid
value. Instead of the value,
dashes 5 are displayed.
The evaluation of the indi-
vidual values is possible in
part only after a certain riding
duration or speed. If a mea-
sured value cannot yet be dis-
played due to unfulfilled mea-
surement conditions, dashes
are displayed instead as place-
holders. As long as no valid
measured value is available, no
evaluation is carried out in the
form of a colored symbol.
Check Control dialog
Messages are output as Check
Control dialog 1.
If several Check Control mes-
sages of the same priority are
present, the messages change
in the order in which they oc-
cur, until they are acknowl-
edged.
If the icon 2 is active, you can
acknowledge this by tilting
the Multi-Controller to the left.
Check Control messages are
dynamically added to the
screens in the
menu as additional tabs
( 85). You can go back to
the message as long as the
fault is present.
My vehicle