Table of Contents
Advertisement
Cleaning and care
Dismantling the door
The oven door is an open system with 4
glass panes which have a heat-
reflective coating on some of their
surfaces.
When the oven is operating, air is
directed through the door to keep the
outer pane cool.
If soiling has worked its way in between
the glass panes, the door can be
dismantled in order to clean in between
the panes.
Scratches on the door glass can
cause the glass to break.
Do not use abrasive cleaners, hard
sponges, brushes or sharp metal
tools to clean the door glass.
When cleaning the door glass, you
must also follow the instructions that
apply to the oven front.
The different sides of the door glass
have different coatings. The sides
facing the oven compartment have
heat-reflecting properties.
The oven could become damaged if
you fit the door glass the wrong way
round.
Make sure that you place the door
glass back in the right position after
cleaning.
Oven cleaners will damage the
surface of the aluminium profiles.
Only clean these parts with warm
water and washing-up liquid, applied
with a clean sponge cloth or a clean,
damp microfibre cloth.
66
The door glass could break if
dropped.
Keep the disassembled door glass in
a safe place.
Risk of injury caused by the door
slamming shut.
The door may slam shut if you
attempt to disassemble it when it is
fitted to the oven.
Always remove the door before
disassembling it.
Place the door with the outer glass
pane on a soft surface (e.g. a tea
towel) to prevent it getting scratched.
The door handle should line up with
the edge of the table so that the glass
lies flat and does not get broken
during cleaning.
Flip the two glass pane retainers
outwards to open them.
Remove the inner pane and the two
middle panes one after the other:
Advertisement
Table of Contents
