Dismantling The Door - Miele H 7890 BP Operating And Installation Instructions

Dismantling the door

The oven door is an open system with 4
glass panes which have a heat-
reflective coating on some of their
surfaces.
When the oven is operating, air is
directed through the door to keep the
outer pane cool.
If soiling has worked its way in between
the glass panes, the door can be
dismantled in order to clean in between
the panes.
Scratches on the door glass can
cause the glass to break.
Do not use abrasive cleaners, hard
sponges, brushes or sharp metal
tools to clean the door glass.
When cleaning the door glass, you
must also follow the instructions that
apply to the oven front.
The different sides of the door glass
have different coatings. The sides
facing the oven compartment have
heat-reflecting properties.
The oven will be damaged if you fit
the door glass the wrong way round.
Make sure that you place the door
glass back in the right position after
cleaning.
Oven cleaners will damage the
surface of the aluminium profiles.
Only clean these parts with warm
water and washing-up liquid applied
with a clean sponge, or with a clean,
damp microfibre cloth.
Cleaning and care
The door glass panes can break if
dropped.
Keep the disassembled door glass in
a safe place.

Risk of injury caused by the door
slamming shut.
The door may slam shut if you
attempt to disassemble it when it is
fitted to the oven.
Always remove the door before
disassembling it.
 Place the door with the outer glass
pane on a soft surface (e.g. a tea
towel) to prevent it getting scratched.
The door handle should line up with
the edge of the table so that the glass
lies flat and does not get broken
during cleaning.
 Flip the two glass pane retainers
outwards to open them.
You can now remove the inner pane
and the two middle panes one after the
other.
99