Table of Contents
Advertisement
The oven must not be used in a non-stationary location (e.g. on a
ship).
Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the oven will endanger your safety and may lead to
the oven malfunctioning.
Do not open the oven housing under any circumstances.
While the oven is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty will be invalidated.
Miele can only guarantee the safety of the oven when original
Miele spare parts are used. Faulty components must only be
replaced by original spare parts.
If the oven is delivered without a power connection cable, a
special cable must be installed by a Miele authorised service
technician (see "Installation", "Electrical connection").
If the connection cable is damaged, it must be replaced with a
special connection cable by a Miele authorised service technician
(see "Installation", "Electrical connection").
During installation, maintenance and repair work, e.g. if the oven
interior lighting is faulty (see "Problem solving guide"), the oven must
be completely disconnected from the household electricity supply.
To ensure this, do one of the following:
- Disconnect the mains fuse
- Completely unscrew the screw-out fuse (in countries where this is
applicable)
- Pull out the plug (if one is present) at the wall socket To do this,
pull the plug and not the mains connection cable.
The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g. by fitting heat insulation strips in the housing unit).
Furthermore, the required supply of cool air must not be excessively
heated by other heat sources (e.g. solid fuel stoves).
Warning and Safety instructions
9
Advertisement
Table of Contents
