56 Fluorescein Angiography Module
+
0
0
+
RetCam3 User Manual
Configuring the FA Module Timer
To configure the FA timer, click Configure at the top left of the screen.
You can configure the following:
• Capture video and images in color or greyscale
• Set the frame rate
• Frame number
• Elapsed time
• Timer position
• Timer display (Frame numbers, etc.)
Note: You can use the timer when you are not in FA mode.
Tip: You can move the timer display to any location on the image capture
window.
Tip: You can use the timer when you are not in FA mode.
Using Video Controls in FA Mode
When you are in FA mode, the timer is controlled separately from the video. For
example, when you pause or stop the video, video capture is interrupted, but the
timer continues uninterrupted.
When you pause video capture, the video images acquired up to that point are
not yet saved to the hard drive.
Images are saved automatically to the hard drive when you stop video capture. The
video display shows the percentage of the available 2GB hard drive space already
used.
PN 21-100375 Rev. A