Table of Contents
Advertisement
40 Image Review and Compare Mode
+
RetCam3 User Manual
Image Adjustment Parameters
Controls to adjust the image display parameters are:
• Brightness
• Contrast
• Red
• Green
• Blue
All parameters have a default setting of zero (0), and range from -100 to +100.
• Each click on the right or left arrow at the end of the slider bar changes the
parameter value by 1.
• Each click on the bar to the right or left of the slider changes the parameter to
the end of the range.
Rotate 180º
Click this button to rotate the image 180º.
Reset Button
Click Reset to reset all display parameters to zero.
Save As
Select to export the image.
Save Settings
Click to save the current settings for Brightness, Contrast and Red, Green and
Blue. The saved settings can be applied when you select Apply Saved Settings.
Apply Saved Settings
Click to apply the currently saved settings for Brightness, Contrast and Red,
Green and Blue. Image display adjustments are applied to all images in the current
image processing session, until you save new settings or click the Reset button,
which resets all parameters to zero.
When you leave the current session, the display settings are reset to zero.
Note: Images you save from the Image Adjustment window will reflect image
display adjustments (and all other changes) you make, but the original
images in the database will not be changed.
PN 21-100375 Rev. A
Advertisement
Table of Contents
