RetCam3 User Manual
In the event that hard shutdown is required, continuously press the System Power
button on the control panel for at least 6 seconds to force the system, including the
backup battery, to shut down.
Turning OFF the Main Power
Flip the main power switch (located on the rear of the system) to OFF. All Control
Panel indicators will be OFF except the AC/DC indicator. The AC/DC indicator will
flash green while the backup battery continues to supply power (at least 15
minutes).
Managing Patient Records
This section describes how to add a new patient and locate the records for an
existing patient.
The software is ready to use when you see the start screen shown in
Add a new patient
Import data from CD, USB, network, etc.
Find existing patients
Figure 9 Start screen
Using the RetCam 3 23
Figure
9.
PN 21-100375 Rev. A