Registering The Wireless Mics To The Base - Snom C620 User Manual

Registration

Registering the wireless mics to the base

Your wireless mics are pre-registered to the base station.
If you need to manually re-register the wireless mics, follow these steps:
1. Press .
Press q or p to highlight Status & Settings, and then press
2.
Press q or p to highlight User Settings, and then press
3.
Press q or p to highlight Registration, and then press
4.
Press q or p to highlight Wireless microphone, and then press
5.
Press q or p to highlight with Base station, and then press
6.
7. Follow the instructions on the conference phone screen.
Press NEXT to move through the screens.
a. Connect the conference phone with AC power (by placing it in the charging
dock).
b. Put one wireless mic on the conference phone charge cradle
c. Press and hold the LINK key on the base station for 4 seconds.
d. Press and hold the
If registration is successful, the mic LED lights up in green for 5 seconds
If registration is unsuccessful, the mic LED lights up in red for 5 seconds.
8. To register the second wireless mic, repeat step 6 to 7.
key on the wireless mic for 3 seconds.
52
.
.
.
.
.