Conference phone operation
Paging
This feature helps you find the conference phone and any misplaced wireless mics
within the range of the base unit.
To start the paging tone:
•
Press the LINK key on the base station.
The Paging screen appears.
•
The conference phone rings and the status indicators flash green.
•
If the wireless mic is not in its cradle, the wireless mic beeps and the status
indicator flashes red.
To mute the paging tone:
Silence
•
Press
-OR-
Press
(MUTE ALL) on the wireless mic or conference phone.
-OR-
Place the wireless mic in its cradle.
To stop the paging tone:
•
Press the LINK key on the base station.
-OR-
Stop
Press
Note: The paging tone automatically stops after 60 seconds has elapsed.
on the conference phone.
on the conference phone.
27