Registration
Registering the conference phone to the base
Your conference phone is pre-registered to the base station. If you need to manually
re-register the conference phone, follow these steps:
1.
Place the conference phone in the charging dock, and make sure it is connected
to power.
2.
If the conference phone is displaying
3.
If the conference phone is displaying
4.
If the conference phone is displaying
5.
If the conference phone is displaying
6.
Press
Cancel
The conference phone displays the following messages:
7.
Press
Yes
The conference phone displays the following message:
8.
On the base station, press and hold the LINK key for 4 seconds.
Both LEDs on the base station begin to flash.
.
.
50
go to step 6.
go to step 7.
go to step 8.
go to step 7.