Register The Wireless Mics To The Base; Deregister The Wireless Mics - Snom C620 Quick Installation Manual

Register the wireless mics to the base

Your wireless mics are pre-registered to the base station�
If you need to manually re-register the wireless mics, follow these steps:
1� Press (MENU)�
2� Select Status & Settings > User Settings > Registration�
3� Select Wireless microphone�
4� Select with Base station�
5� Follow the instructions on the conference phone screen�
Press NEXT to move through the screens�
a� Connect the conference phone with AC power�
b� Put one wireless mic on the conference phone charge cradle
c� Press and hold the LINK key on the base station for 4 seconds�
d� Press and hold the
If registration is successful, the mic LED lights up in green for 5 seconds
If registration is unsuccessful, the mic LED lights up in red for 5 seconds�
6� To register the second wireless mic, repeat step 4 to 5�

Deregister the wireless mics

1� Press (MENU)�
2� Select Status & Settings > User Settings > Registration�
3� Select Deregistration�
4� On the Deregistration screen, select the wireless microphone you want to
deregister�
5� Enter the PIN� Default PIN is 1590�
If deregistration is successful, the conference phone displays a message�
For example, MICROPHONE 3" is deregistered�"
6� To deregister another wireless mic, go to step 3�
key on the wireless mic for 3 seconds�
11