Registering Wireless Microphones - Snom C520-WiMi User Manual

Configuring the Phone

Registering wireless microphones

The wireless microphones delivered with the C520-WiMi are preregistered. If you
do need to register a wireless microphone (e.g., if you have purchased a C520-WiMi
Replacement Microphone), it must be registered to the phone.
• The phone must be idle when registering wireless microphones.
• The phone supports two microphone registrations; previous registrations must be
deregistered before you can register the two microphones you want to use.
• Do not remove the wireless microphones from the charging cradles during the
entire registration process. A microphone that was registered before but is not in
the charging cradle during a new registration process will be deregistered.
• The LED status indicator on each wireless microphone flashes red and green
alternatingly during registration.
1. Place the microphones you want to register into the phone's charging cradles.
2. Press .
3. Press 3 User settings.
4. Press 4 Wireless microphones.
5. Press 2 Deregister and confirm by pressing "Yes" to delete any previous
registrations. If sucessful, the display will say "Wireless microphones are
deregistered".
6. Press 1 Register to register one microphone. The display will say "Registering....".
If successful, you will hear a confirmation tone and the display will say "Registration
succeeded". The status indicator of the registered microphone switches to a steady
red light while the second, unregistered microphone continues to flash red and
green alternately.
7. Press 1 Register again to register the second microphone. The display will say
"Registering....". If successful, you will hear a confirmation tone and the display
will say "Registration succeeded". The status indicator of the second microphone
switches to a steady red light.
• If registration fails, the display will say "Registration failed". Remove the
microphones from the charging cradles and put them back in. Repeat the entire
registration process, steps 2 to 7.
• To stop a registration in progress, press . The display says "Registration
cancelled". One or both microphones may be deregistered. Repeat the
registration process, steps 1 to 7, to register them.
48