Snom C620 User Manual page 65

Troubleshooting
The status indicator on the wireless mic does not turn orange when in
charging cradle.
• The wireless mic might be fully charged.
• Clean the charging contacts on the wireless mic and the charging cradles
each month with a pencil eraser or a dry non-abrasive fabric.
• Make sure the base station DC 5V 800 mA power adapter, telephone line,
and the charging dock DC 12V 3A round jack power adapter are plugged in
properly (see page 3).
• Make sure the wireless mic is placed in the charging cradle correctly.
• Unplug the base station DC 5V 800 mA power adapter . Wait for 15 seconds
before plugging it back in. Allow up to one minute for the wireless mic and
base station to reset.
• Lift the wireless mic and place it back into the charging cradle. If the wireless
mic status indicator turns orange for 5 seconds, and then turns off, the
battery is fully charged.
There is interference during a telephone conversation.
My calls fade out when I am using the wireless mic.
• Move the wireless mic closer to the conference phone. It may be out of range.
• Appliances plugged into the same circuit as the base station can cause
interference. Try moving the appliance or base station to another outlet.
• Other electronic products such as ham radios and other DECT phones can
cause interference with your conference phone. Try installing your conference
phone as far away as possible from these types of electronic devices.
I have accidentally set my conference phone language to Spanish or French, and
I don't know how to change it back to English.
1. Press when the conference phone is not in use or on a call.
2. Press q or p to highlight Estado y configuración or Statuts et réglages, and
then press
3. Press q or p to highlight Ajustes usuario or Régl. utilisat., and then press
.
4. Press q or p to highlight Idioma or Langage, and then press
5. Press q or p to highlight English, and then press
.
61
.
.