Wiring Diagram - Vinotemp WM-1500HZD Service Manual

4. The ohmmeter should show a reading of 50 ohms ± 10%.
5. Reconnect the wires to the proper terminals as previously marked.
B. Live voltage
1. The WINEMATE unit needs to be plugged in and turned on.
2. Locate the black and white wires from the fan motor being tested and
follow them back to the terminal block.
3. Set the voltmeter to the AC 200 scale.
4. Touch and hold one voltmeter probe to one of the wire terminals, then
touch and hold the other probe to the other wire.
5. The voltmeter should show a reading of 115 volts.
II. Wiring Diagram
Figure 3-5
- 18 -