Vinotemp WM-1500 Installation Instruction

Cooling unit

Hide thumbs Also See for WM-1500:

Download this manual See also: Use and Care Manual

1. Location

• Place the wine cellar in a properly ventilated location. Otherwise, heat

exhausted by the cooling unit will build up and it will not operate properly.

• The exhaust area must not be closed space and must be ventilated.

1) Rear Exhaust

• Leave min 6 "clearance from the rear to the wall.

• Leave min 12" clearance from the top to the ceiling.

• Leave min 6" clearance from the left and right sides.

2) Front Exhaust

• Leave min 6" clearance from the front if left and right sides unobstructed.

• Or, leave min 36" clearance from the front if left and right sides obstructed

3) Top Exhaust

• Leave min 12" from the top to the ceiling.

• Leave min 2 "clearance from the rear to the wall.

• Leave min 2" clearance from the left and right sides.

4) Side Exhaust

• Leave min 6 "clearance from the left or right side to the wall.

• Leave min 12" clearance from the top to the ceiling.

2. Installation

VINO1500CD, CTED

VINO2500CD, CTED

Installation Instruction

Fig. 2.1 COOLING UNIT MOUNTING

- 1 -

Page 1: Installation Instruction
VINO1500CD, CTED VINO2500CD, CTED Installation Instruction 1. Location • Place the wine cellar in a properly ventilated location. Otherwise, heat exhausted by the cooling unit will build up and it will not operate properly. • The exhaust area must not be closed space and must be ventilated. 1) Rear Exhaust •...
Page 2 Fig. 2.2 TOP EXHAUST GASKET • Cut a rectangular opening with the ¼” clearance at the rear of wine cabinet to the width and height of the cooling unit. • If top exhaust, cut a rectangular opening at the top of the cabinet to the length and width of the top exhaust openings.

1500cd 2500cd Vino1500cd Vino1500cted Vino2500cd Vino2500cted