Operation Information - Vinotemp WM-1500HZD Service Manual

II. Operation Information
WINEMATE cooling units are designed to, when installed in a properly
constructed enclosure or closet, provide a constant, selectable, temperature
°
between 52-62 F while maintaining 55-70% RH at an ambient environment of 75
°
F and 55% RH. Products requiring these storage conditions include wine, furs,
pastries, tobacco, chocolates and documents. WINEMATE cooling units are not
intended to cool service cabinets that are maintained at lower temperatures and
are opened frequently.
Table 4-1 Specification under 75
WINEMATE
CAPACITY at 52
1500HZD 1500 Btu/h
2500HZD 2500 Btu/h
Before installing the unit in the enclosure, place it on a table and plug it into a
properly grounded outlet. it will run as soon as it is plugged in. Allow it to run for
approximately 15 minutes. There should be a flow of cool air from the front cold
air discharge opening and warm air from the back hot air exhaust opening. See
Figure 4-1 for detail.
If your installation cannot be performed in accordance with these instructions,
contact your dealer. WINEMATE cooling units are not designed to have duct
systems on either the hot air exhaust or cold air discharge. Do not drill any holes
in the cooling unit as severe damage may occur and the warranty will be void.
DIMENSIONS IN.
F
°
WXHXD
14.25X13.25X 16
14.25X13.25X 16
- 23 -
°
F, 55%RH
ELECTRICAL
115V 60HZ 1PH 4A
115V 60HZ 1PH 5A
WEIGHT
50 LBS
55 LBS