Selecting The Site - Canon NP6012 Service Manual

LL _»_» SS SSS SSS eSNG TALL OT
|. SELECTING THE SITE
Make sure that the site satisfies the fol-
lowing requirements; pay a visit to the user's
before the delivery of the machine:
* The site should have an exclusive
power outlet that can provide the rated
voltage +10% (15A or more).
The site's temperature must be 7.5° to
32.5°C and humidity, 5% to 85%.
Avoid areas near water faucets, water
boilers, humidifiers, and refrigerators.
Avoid areas near sources of fire or
areas subject io ammonium gas and
direct rays of the sun. (As necessary,
provide curtains.)
The site must be well ventilated.
The amount of ozone generated by the
copier while in use will not affect the
health of the individuals around it.
Some, however, may find the odor
unpleasant, and it is important to keep
the site well ventilated.
The site should be able to keep the
copier level, with its feet firmly in con-
tact.
The site must allow at least 10 cm of
space from all walls enough for the
operation of the machine.
LLL LLLLLLLLLLALLL ALL ALL,
10 cm min.
& G
a
Cc Ry:
10 cm min.
Figure 5-101
COPYRIGHT © 1995 CANON INC. CANON NP6012 /NP6OI2F/ NP6212 REV,1 SEPT. 1995 PRINTED IN JAPAN (IMPRIME AU JAPON) 5-1