Canon NP6012 Service Manual page 141

ESOP EPATIONS 7.00 015091155 SSS
7. Filling Out the Service Label
Figure 7-4 shows the label attached
behind the front upper cover. Each machine
is adjusted and set at the factory, and the
settings are recorded on the label.
You must correct the settings recorded
on the label whenever you have entered
new settings.
If you have replaced the DC controller,
be sure io enter the settings recorded on the
label. Further, if you have replaced the com-
posite power supply PCB or the pre-expo-
sure lamp, you must enter the settings
recorded on the label attached to the service
label and copy the settings to the service
label.
Figure 3-904
3-96 COPYRIGHT © 1995 CANON INC. CANON HP5012/NPECI2F/NP6212 REY.1 SEPT. 1995 PAINTED IN JAPAN (IMPRIME AU JAPON)