Canon NP6012 Service Manual page 15

Wl GENERAL DESCRIPTION
B. Cross Section
1. Copier
8 8 e2ON 8 @ OH BABS DH B®
@ No. 3 mirror @® Reflecting plate @) Static eliminator
@® No. 2 mirror ® No. 4 mirror @ Photosensitive drum
@ No. 1 mirror No. 5 mirror @) Feeding assembly
@ Scanning lamp @® Copyboard glass @ Primary charging roller
@® Heat exhaust fan Copyboard cover @ Cassette
@® Drum unit @ Multifeeder tray € Fixing film tension roller
@ Lens array Cassette pick-up roller 6) Fixing film
Pre-exposure lamp Multifeeder pick-up roller § @) Lower fixing roller
@
No.1 charging rotler
@
Developing assembly
@
Fixing film drive roller
cleaning pad @) Registration roller @ Delivery roller
Side blank exposure lamp @ Developing cylinder 6) Delivery tray
a) No. 6 mirror @ Transfer roller
Figure 1-307
2.ADF
© ® ® ® ©
@ ® B®
@ Delivery roller
® Auxiliary tray
©
Feeding belt drive roller
@ Delivery tray @® Guide plate Feeding belt
@ Pick-up roller @ Separation pad @ Feeding belt roll
@
Original tray
Registration roller
@
Feeding belt tink roller
Figure 1-308
1-8
COPYRIGHT © 1995 CANON INC.
CANON NP6OT2/NPGOT2F/NPE212 REV.1 SEPT. 1995 PRINTED IN JAPAN (IMPRINE AU JAPON)
,