Table of Contents
Advertisement
INSTALLATION Baa
lll. RELOCATING THE COPIER
Go through the following steps if you must relocate the copier by truck or other means of
transportation:
Turn on the power switch, and press the Default Ratio key to
select 70%.
Press the Paper Select key to select the multifeeder tray.
Without placing any paper on the multifeeder tray, press the | The machine automatically makes
Copy Start key.
adjustments for installation of the
fixing screw.
e When the adjustment is over, the
indicator representing the
multifeeder on the controf panel
starts to flash and the count/ratio
indicator indicates 'P'.
Turn off the power switch, and disconnect the power plug.
Lift the copier open/close lever, and open the copier.
Take out the screws stored at time of installation.
Close the top unit securely, and tape it to prevent it from
opening.
Place A4 copy paper on the copyboard glass, close the
copyboard cover, and tape it in place.
Fit the screws taken out in step 6 to the leit and the right of
the copier.
COPYRIGHT © 1995 CANON INC.
CANON NP6012/NP6O12F /NP6212 REV.1 SEPT. 1995 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-17
Advertisement
Chapters
Table of Contents
