Table of Contents
Advertisement
Sana
SSS
CHANICAL SVSTEME
C. Feeding Assembly
D. Registration Roller
1.
Detaching the Feeding Belt
1.
Removing the Pick-Up Clutch
1) Open the copier's top unit.
1) Remove the top cover. (See "Removing
2)
Push down the stopper @, and remove
the Top Cover.")
the gear @.
2)
Remove
the front lower cover. (See
"Removing the Front Lower Cover.")
The top unit will jumpopen; keep a
hand on the top while opening it.
3)
If the copier came with an ADF as stan-
dard, open the upper frame unit, and
remove the two screws @ to remove the
sub hinge mount ©.
Figure 4-323
3) Remove the bushing @, and remove
each roller @ and detach the feeding
belt ©.
Figure 4-325
4)
If the copier came with an ADF as stan-
dard, remove the spring ©.
Figure 4-324
Figure 4-326
COPYRIGHT © 1995 CANONINC,
CANON NP6OI2/NP6OT2F/NPG212 REV. SEPT. 1995 PRINTED IN JAPAN (IMPRIME AU JAPON}
4-27
Advertisement
Chapters
Table of Contents
