Canon NP6012 Service Manual page 144

OPERATIONS AND TIMING i
E. Machine Settings Mode
1} Choose the appropriate item using the +/- key, and press the Start key to select it.
2) Change the setting using the +/- key.
3) Press the AE key to store the setting.
4) To clear the item, press the Clear/Stop key.
Setting it to '0' sets the v upper limit to 100.
default: 0
Use it to decide on whether the density
adjustment mode at power-on should be
AE or manual.
0: AE mode
other than 0; manual mode
default: 0
Table 3-904
F. Counter Mode
Use this mode to check the total copy counter. (If the machine is equipped with the drum unit
replacement time automatic display function, indicates the number of copies processed by the existing
drum unit.) The indication will be in tens/ones and thousands/hundreds, and ten thousands;
for example, if 13,500 copies,
3 oo
total counter 0
- total counter 1
—— total counter 2
1) Choose an item using the +/- key, and press the Start key to select it.
2) To clear the item, press the Clear/Stop key.
Function besen
Total counter 0 Indicates tens and ones.
Total counter 1 Indicates thousands and hundreds.
Total counter 2 Indicates ten thousands.
Table 3-905
COPYRIGHT © 1995 CANON INC. CANON NP6Ot2/NP6O12F/NP6212 REV.1 SEPT. 1995 PRINTED N JAPAN (IMPRIME AU JAPON} 3-99