Pitco SELV Series Manual page 71

26. Remove the filter return valve using an
adjustable wrench.
27. Remove the filter return valve adapter using
an adjustable wrench.
28. Remove the four (4) screws on the entrance
box using a 5/16 inch socket.
29. Remove the two (2) mounting screws on the
wire channel using a Phillips screwdriver.
30. Remove the entrance box and wire channel
assembly as one piece.
31. Remove the entrance box support brackets
from entrance box heat shields using a 5/16
inch hex wrench.
32. Remove the entrance box heat shields
using a 5/16 inch hex wrench.
33. Follow steps 1 through 32 in reverse to
install a new tank.
L22-393 R0 Page 71