Removing The Entrance Box Covers - Pitco SELV Series Manual

4.2 Removing the Entrance Box Covers

1. Remove the two (2) screws on the entrance
box lower cover located on the left side of the
unit using a Philips screwdriver.
2. Remove the four (4) screws entrance box
lower cover located on the right side of the unit
using a Philips screwdriver.
3. Remove the two (2) screws on the entrance
box upper cover using a Philips screwdriver.
4. Follow steps 1 through 3 in reverse to
reinstall the entrance box covers.
L22-393 R0 Page 21