Pitco SELV Series Manual page 68

5. Disconnect and remove the power cords
from the entrance box.
6. Loosen the four (4) drain elbow bolts using a
9/16 inch socket.
7. Slide the entire drain line assembly off of the
drain extension nipples.
8. Remove the four (4) screws that hold down
the entrance box using a 5/16 inch socket.
9. Disconnect the filter pump box power supply.
10. Disconnect the following connectors at the
wire channel: DVI switch, probes, and hi-limit.
11. Remove the basket hangers.
L22-393 R0 Page 68