Pitco SELV Series Manual page 69

12. Remove the six (6) screws, which hold the
back of the splash back, using a 5/16 inch
socket.
13. Remove the two (2) screws, which hold the
front of the splash back, using a flathead
screwdriver.
14. Remove the splash back by lifting up.
15. Remove the four (4) screws, which hold the
cabinet back cover, using a 5/16 inch socket.
16. Disconnect all return hoses from the tank
being replaced using an adjustable wrench.
17. Remove the cotter pin from filter return
handle using needle-nose pliers and disconnect
from 3-way return valve.
L22-393 R0 Page 69