Flashforge Adventurer 5M User Manual page 14

Printing via FlashCloud
Click on settings and then click on the FlashCloud icon, turn on the FlashCloud switch,
and view the registration code. Open the FlashCloud website and register an account.
After email activation, you can log in and use FlashCloud: https://cloud.sz3dp.com/.
Click [My Printer] - [Add Printer]. On the Add Printer page, enter the registration code
(cloud registration code) and name the printer. After clicking [OK], the information will
appear on the printer's FlashCloud interface.
Printing via PolarCloud
Open the Polar Cloud website and register an account. Polar Cloud:
Note: Polar Cloud service may not be available in your region.
After logging in, click the icon at the top right corner, click [Settings], and click [PIN Code]
in the menu to find the PIN code. After connecting the Adventurer 5M to the network,
simply turn on the Polar Cloud switch and enter your account and PIN code.
Model Removal After Printing
Note: When printing is completed, the nozzle and build plate may still be at a high
temperature. It is recommended to allow them to cool down before removing the
model.
After printing is completed, directly take out the flexible steel plate and bend the
platform to remove the model. Ensure there is no residual filament on the platform
before the next print.
Tips on model removal:
Please take the platform plate outside the printer for model removal to prevent
•
model debris from accumulating inside the printer. It's recommended to keep
the chamber clean.
For models printed with TPU or other flexible materials, it is recommended to use
•
a scraper for removal, which ensures you can remove the flexible model from the
bed without causing damage.
14
https://polar3d.com