Flashforge Adventurer 5M User Manual page 3

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Safety Notice
Please carefully read and strictly follow all the safety warnings and notices below all the
time.
Note: Each 3D printer undergoes printing tests before leaving the factory. Filament
residue on the nozzle or slight scratches on the build plate are normal and do not affect
usage.
Work Environment Safety
Please keep the workspace clean and tidy.
•
Please ensure the equipment operates away from combustible gases, liquids,
•
and dust. High temperatures generated during operation may react with
combustible gases, liquids, or airborne dust, potentially causing fires.
Children and untrained individuals should not operate the equipment alone.
•
Electrical Safety
Please properly ground the equipment. Do not modify the plug. Ungrounded
•
equipment/improperly grounded equipment/modified plug will inevitably
increase the risk of electric leakage.
Avoid exposing the equipment to damp or direct sunlight environments.
•
Humidity will increase the risk of electric leakage. Exposure to sunlight will
accelerate the aging of plastic parts.
Make sure to only use the power cord provided by Flashforge.
•
Do not use the equipment during thunderstorms.
•
Please turn off the equipment and unplug it if it is not in use for a long time.
•
3