Advertisement
Step 16
Fasten the TURNTABLE (12) to the TURNTABLE BOTTOM (N).
å
Use four SILVER 1/2" PAN HEAD SCREWS (17).
The large hole in the
TURNTABLE (12) must
line up with the large
hole in the TURNTABLE
BOTTOM (N).
Page 20
SILVER 1/2" FLAT HEAD SCREW
12
N
Just breathe.
It's going to be ok.
17
(4 used in this step)
The holes must be
1-5/8" from the edges.
Advertisement
