Download
Share
Print this page
Teknik Boulevard Cafe 5420650 Manual
  1. Manuals
  2. Brands
  3. Teknik Manuals
  4. Indoor Furnishing
  5. Boulevard Cafe 5420650
  6. Manual

Teknik Boulevard Cafe 5420650 Manual

L-shaped desk
Hide thumbs Also See for Boulevard Cafe 5420650:

Advertisement

Quick Links

Download this manual
www.teknikoffice.co.uk
Boulevard Cafe L-Shaped Desk
Model 5420650
Teknik
The original desktop.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.

Advertisement

loading

Related Manuals for Teknik Boulevard Cafe 5420650

Summary of Contents for Teknik Boulevard Cafe 5420650

  • Page 1 Teknik The original desktop. Boulevard Cafe L-Shaped Desk Model 5420650 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
  • Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 6-38 Français 39-43 Skip the power trip. This time. Español 44-48 Safety 49-50 Warranty Page 2...

  • Page 3: Part Identification

    Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. LARGE LEFT END (1) REAR RIGHT TUBE (1) DD SHELF (1)

  • Page 4: Hardware Identification

    Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. (EXTENSION SET SHOWN SEPARATED) LARGE HIDDEN SMALL HIDDEN EXTENSION RAIL - 4 EXTENSION SLIDE - 4 CAM - 2 CAM - 15 LONG CAM CAM SCREW - 13 METAL BRACKET - 7 SCREW - 4...
  • Page 5 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. BLACK 1-3/4" PAN HEAD SCREW - 6 BLACK 1-9/16" FLAT HEAD SCREW - 30 BLACK 1-3/8" HEX HEAD SCREW - 25 BLACK 7/8" HEX HEAD SCREW - 5 BLACK 13/16"...
  • Page 6 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Push two LARGE HIDDEN CAMS (25) into the SMALL å RIGHT END (V). Arrow (2 used) Arrow Hole The arrow in the HIDDEN...
  • Page 7 Step 2 Push fi fteen SMALL HIDDEN CAMS (26) into the SMALL å LEFT END (S), BOX ENDS (F and G), BOX FRONT (H), BOX BOTTOM (J), UPRIGHTS (X and W) and LONG BACK (Z). Arrow Arrow (15 used) Arrow Hole The arrow in the HIDDEN CAM must point toward the...
  • Page 8 Step 3 Fasten seven METAL BRACKETS (29) to the å SMALL RIGHT UPRIGHT (X), SHORT BACK (Q), and LONG BACK (Z). Use seven BLACK 5/8" FLAT HEAD SCREWS (43). BLACK 5/8" FLAT HEAD SCREW (7 used for METAL BRACKETS) Turn thirteen CAM SCREWS (27) into the å...
  • Page 9 Step 4 Turn four LONG CAM SCREWS (28) into the LARGE TOP (AA) å and SHORT TUBES (Y). Remember: Righty tighty. Lefty loosey. Page 9...
  • Page 10 Step 5 Fasten the LARGE LEFT END (A) to the LARGE WIRE å BACK (B). Tighten two BLACK 1-3/8" HEX HEAD SCREWS (39) using the L-WRENCH (36). BLACK 1-3/8" HEX HEAD SCREW (2 used in this step) Page 10...
  • Page 11 Step 6 Fasten the SHELF TUBES (D) to the LONG SHELVES (C). å Use twelve BLACK 9/16" LARGE HEAD SCREWS (44). NOTE: Be sure SHELF TUBES wrap around the edges of å the LONG SHELVES. BLACK 9/16" LARGE HEAD SCREW (12 used in this step) These edges should be even.
  • Page 12 Step 7 Fasten the LONG SHELF (C) with one SHELF TUBE (D) to å the LARGE LEFT END (A). Tighten one BLACK 1-3/8" HEX HEAD SCREW (39) using the L-WRENCH (36). Fasten the LONG SHELF (C) to the LARGE WIRE BACK (B). å...
  • Page 13 Step 8 Fasten the LONG SHELF (C) with two SHELF TUBES to å the LARGE LEFT END (A). Tighten two BLACK 1-3/8" HEX HEAD SCREWS (39) using the L-WRENCH (36). e w s s c r i t h f a c S u r BLACK 1-3/8"...
  • Page 14 Step 9 Fasten the FRONT RIGHT TUBE (CC) to the SMALL TOP (E). å Use four BLACK 9/16" LARGE HEAD SCREWS (44). NOTE: Be sure the FRONT RIGHT TUBE wraps around å the edge of the SMALL TOP. Fasten the MAGNETIC CATCH SPACER (32) and å...
  • Page 15 Step 10 Fasten the BOX ENDS (F and G) to the BOX FRONT (H). å Use four BLACK 1-9/16" FLAT HEAD SCREWS (38). Fasten the BOX FRONT (H) and BOX ENDS (F and G) to å the SMALL TOP (E). Tighten fi ve HIDDEN CAMS. BLACK 1-9/16"...
  • Page 16 Step 11 Fasten the BOX BOTTOM (J) to the BOX FRONT (H). å Tighten three HIDDEN CAMS. Page 16...
  • Page 17 Step 12 Fasten the BOX BOTTOM (J) to the BOX ENDS (F and G). å Use four BLACK 1-9/16" FLAT HEAD SCREWS (38). BLACK 1-9/16" FLAT HEAD SCREW (4 used in this step) Page 17...
  • Page 18 Step 13 Fasten the SMALL TOP (E) to the LARGE LEFT END (A). å Tighten one BLACK 1-3/8" HEX HEAD SCREW (39) using the L-WRENCH (36). Fasten the SMALL TOP (E) to the LARGE WIRE BACK (B). å Use four BLACK 9/16" LARGE HEAD SCREWS (44). BLACK 9/16"...
  • Page 19 Step 14 NOTE: Do not completely tighten the SCREWS in this step. å Fasten the BACK (L) and RIGHT BOTTOM (K) to the å LARGE RIGHT END (M). Use fi ve BLACK 3/8" HEX HEAD SCREWS (47) and the L-WRENCH (36). BLACK 3/8"...
  • Page 20 Step 15 NOTE: Do not completely tighten the SCREWS in this step. å Fasten the SHORT RIGHT TUBES (N) to the LARGE å RIGHT END (M). Use two BLACK 1-3/8" HEX HEAD SCREWS (39) and the L-WRENCH (36). BLACK 1-3/8" HEX HEAD SCREW (2 used in this step) Page 20...
  • Page 21 Step 16 Fasten the LARGE UPRIGHT (O) to the BACK (L). Tighten å three BLACK 3/8" HEX HEAD SCREWS (47) with the L-WRENCH (36). Fasten the LARGE UPRIGHT (O) to the RIGHT å BOTTOM (K). Use two BLACK 3/8" HEX HEAD SCREWS (47) and the L-WRENCH (36).
  • Page 22 Step 17 NOTE: Start all of the SCREWS before completely å tightening any of them. Fasten the LARGE RIGHT END (M) to the SMALL TOP (E) å and LONG SHELVES (C). Tighten six BLACK 1-3/8" HEX HEAD SCREWS (39) using the L-WRENCH (36). BLACK 1-3/8"...
  • Page 23 Step 18 Fasten the LARGE UPRIGHT (O) to the SMALL TOP (E). å Use three BLACK 5/8" PAN HEAD SCREWS (42). Side Step: Make nachos. (Optional, but Fasten the REAR RIGHT TUBE (P) to the LARGE å recommended.) UPRIGHT (O). Tighten one BLACK 3/8" HEX HEAD SCREW (47) using the L-WRENCH (36).
  • Page 24 Step 19 Fasten the SHORT BACK (Q) to the SMALL WIRE BACK (R). Use two BLACK 1-3/4" PAN HEAD SCREWS (37). å NOTE: Start all of the hex head SCREWS before completely tightening any of them. å Fasten the SMALL WIRE BACK (R) to the SMALL LEFT END (S). Use two BLACK 1-3/8" HEX HEAD SCREWS (39) and å...
  • Page 25 Step 20 NOTE: Start all of the hex head SCREWS before å completely tightening any of them. Fasten the SMALL RIGHT END (V) to the SMALL WIRE å BACK (R) and SHORT LEFT TUBES (T). Tighten four BLACK 1-3/8" HEX HEAD SCREWS (39) using the L-WRENCH (36).
  • Page 26 Step 21 Insert two WOOD DOWELS (30) into the short edges of å the SMALL UPRIGHTS (W and X). Fasten the SHORT TUBES (Y) to the SMALL å UPRIGHTS (W and X). Tighten two HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the SMALL å...
  • Page 27 Step 22 Insert a WOOD DOWEL (30) into the hole in the SMALL å RIGHT UPRIGHT (X). Fasten the SMALL RIGHT UPRIGHT (X) to the LONG å BACK (Z). Tighten the HIDDEN CAM. NOTE: Be sure the WOOD DOWEL in the SMALL RIGHT å...
  • Page 28 Step 23 Insert four WOOD DOWELS (30) into the LARGE TOP (AA). å Fasten the SMALL UPRIGHTS (W and X) and LONG BACK (Z) to the LARGE TOP (AA). Tighten two HIDDEN CAMS. å Fasten the SMALL RIGHT UPRIGHT (X) and LONG BACK (Z) to the LARGE TOP (AA). Use fi ve BLACK 5/8" FLAT å...
  • Page 29 Step 24 Separate the EXTENSION SLIDES (24) from the EXTENSION RAILS (23) å as shown in the upper diagram below. Be prepared, the parts are greasy. Fasten the EXTENSION RAILS (23) to the SMALL ENDS (S and V) å and SMALL LEFT UPRIGHT (W). Use twelve BLACK 1/2" FLAT HEAD SCREWS (46).
  • Page 30 Step 25 This step will require two people to fasten the å LARGE TOP (AA) section to the SMALL TOP (E) section. Pro Tip: Lift with your legs. And, you know, Carefully stand the SMALL TOP (E) section upright. å your arms.
  • Page 31 Step 26 Fasten the LONG LEFT TUBE (BB) to the SMALL å RIGHT END (V) and FRONT RIGHT TUBE (CC). Tighten two BLACK 3/8" HEX HEAD SCREWS (47) with the L-WRENCH (36). BLACK 3/8" HEX HEAD SCREW (2 used in this step) Page 31...
  • Page 32 Step 27 Turn four METAL PINS (35) into the holes of your å choice in the LARGE RIGHT END (M) and LARGE UPRIGHT (O) for placement of the ADJUSTABLE SHELF (DD). Place the ADJUSTABLE SHELF (DD) onto the å METAL PINS. Push three GROMMETS (33) into the large holes in å...
  • Page 33 Step 28 Fasten the hinges on the DOOR (EE) to the LARGE RIGHT å END (M). Use four BLACK 1/2" PAN HEAD SCREWS (45). BLACK 1/2" PAN HEAD SCREW (4 used in this step) Page 33...
  • Page 34 Step 29 Fasten a DRAWER SIDE (HH) to the LARGE DRAWER BOX FRONT (JJ) and the LARGE DRAWER BACK (II). Use four å BLACK 1-9/16" FLAT HEAD SCREWS (38). Fasten the DRAWER BRACES (KK) to the LARGE DRAWER BOX FRONT (JJ) and the LARGE DRAWER BACK (II). Use å...
  • Page 35 Step 30 Fasten a DRAWER SIDE (HH) to the SMALL DRAWER BACK (MM) and SMALL DRAWER BOX FRONT (NN). Use four å BLACK 1-9/16" FLAT HEAD SCREW (38). Slide the SMALL DRAWER BOTTOM (OO) into the grooves of the DRAWER SIDE (HH), SMALL DRAWER BACK (MM) å...
  • Page 36 Step 31 Fasten the SMALL DRAWER FRONT (GG) to the SMALL å DRAWER BOX FRONT (NN). Tighten two BLACK 7/8" HEX HEAD SCREWS (40) with the L-WRENCH (36). Fasten the LARGE DRAWER FRONT (FF) to the LARGE å DRAWER BOX FRONT (JJ). Tighten three BLACK 7/8" HEX HEAD SCREWS (40) with the L-WRENCH (36).
  • Page 37 Step 32 Fasten the EXTENSON SLIDES (24) to the DRAWER å SIDES (H) as shown. Use twelve BLACK 1/2" FLAT HEAD SCREWS (46). Open end Open end Open end BLACK 1/2" FLAT HEAD SCREW (12 used for the EXTENSION SLIDES) Open end BLACK 1/2"...
  • Page 38 Step 33 Peel APPLIQUES from the APPLIQUE CARD (34) and stick them onto each visible HIDDEN CAM. å To insert a drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the å unit and push the drawer into the unit until the drawer is fully inserted.
  • Page 39 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves or drawers. •...