Page 1
Teknik www.teknikoffice.co.uk Get crafty. Wall Mounted Pegboard with Thread Storage Craft Collection | Model 5423412 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 2
Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps Hammer Not actual size Français Pencil Español Electric drill with 1/4" bit (ONLY in indicated step) Safety 9-10 Tape Measure Warranty Page 2...
Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. UNIT (1) Hardware Identifi...
Page 4
Step Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Turn the UNIT (A) onto its front edges. å Fasten the BRACKETS (3) to the UNIT (A) exactly as å...
Page 5
Step Step 2 Stand your unit upright. å Insert the PEGS (1) into the UNIT (A). å (24 used) Page 5...
Page 6
Step Step 3 The centers of the BRACKETS used to hang your unit are spaced 25-5/8" apart. With your tape measure, measure the å distance on your wall. Then, mark the locations on your wall with a pencil. The marks should be 2-5/16" down from the top of your unit.
Page 7
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Properly mounting the shelf to the wall. •...
Need help?
Do you have a question about the Craft 5423412 and is the answer not in the manual?
Questions and answers