Related Manuals for Teknik Craft 5427456
Summary of Contents for Teknik Craft 5427456
- Page 1 Teknik www.teknikoffice.co.uk Knick-knack paddywhack, give your stuff a home. Work Table/Island NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Craft Collection | Model 5427456 PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Hardware Identification Tip Shown Actual Size Assembly Steps 5-23 Français 24-26 Español 27-29 Safety Warranty Page 2...
- Page 3 Now you know Part Identification our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. END (2) LOWER SHELF (2) BOTTOM FRAME (1)
- Page 4 Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. LONG WOOD HIDDEN CAM - 56 CAM SCREW - 56 WOOD DOWEL - 12 DOWEL - 4 SMALL WOOD SMALL LONG KNOB - 6 APPLIQUE CARD - 10 DOWEL - 4 WOOD DOWEL - 4...
- Page 5 Step 1 å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. Some assembly å Push fifty-six HIDDEN CAMS (1) into the UPRIGHTS (B (and snacks) required. and C), BOTTOM (E), SHELVES (F, G, H, and I), and DRAWER SIDES (O).
- Page 6 Step 2 å Turn forty-eight CAM SCREWS (2) into the exact holes shown in the ENDS (A), UPRIGHTS (B and C), TOP (D), and DRAWER FRONTS (N). å NOTE: Be sure to use the exact holes shown. å Fasten four METAL BRACKETS (14) to the ENDS (A). Use four SILVER 1/2"...
- Page 7 Step 3 å Insert three WOOD DOWELS (3) into the exact holes shown in one of the ENDS (A). å Fasten the SHELVES (F and G) to the END (A). Tighten four HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the END insert into the holes in the SHELVES.
- Page 8 Step 4 å Insert two SMALL WOOD DOWELS (5) into one of the SMALL UPRIGHTS (K). å Push the SMALL WOOD DOWELS in the SMALL UPRIGHT (K) into the exact holes shown in the END (A). Page 8...
- Page 9 Step 5 å Turn eight CAM SCREWS (2) into the exact holes shown in the other surfaces of the UPRIGHTS (B and C). å NOTE: Be sure to use the exact holes shown. (8 used) Page 9...
- Page 10 Step 6 å Insert two LONG WOOD DOWELS (4) into the exact holes shown in the SHELVES (F and G). å Insert two SMALL LONG WOOD DOWELS (6) into the holes in the SMALL UPRIGHT (K). å Fasten the LEFT UPRIGHT (C) to the SHELVES (F and G). Tighten four HIDDEN CAMS.
- Page 11 Step 7 å Fasten the CENTER SHELVES (H and I) to the LEFT UPRIGHT (C). Tighten four HIDDEN CAMS. å NOTE: Be sure the LONG WOOD DOWELS in the LEFT UPRIGHT insert into the holes in the CENTER SHELVES. i t h c e w A M S S u r f a...
- Page 12 Step 8 å Push the CENTER UPRIGHT (J) onto the SMALL LONG WOOD DOWELS in the LEFT UPRIGHT (C). Don't worry. It isn't Rome. This can be built in a day. Page 12...
- Page 13 Step 9 å Insert two LONG WOOD DOWELS (4) into the exact holes shown in the CENTER SHELVES (H and I). å Insert two SMALL LONG WOOD DOWELS (6) into the holes in the CENTER UPRIGHT (J). å Fasten the RIGHT UPRIGHT (B) to the CENTER SHELVES (H and I). Tighten four HIDDEN CAMS.
- Page 14 Step 10 å Fasten the SHELVES (F and G) to the RIGHT UPRIGHT (B). Tighten four HIDDEN CAMS. å NOTE: Be sure the LONG WOOD DOWELS in the RIGHT UPRIGHT insert into the holes in the SHELVES. i t h c e w A M S S u r f a...
- Page 15 Step 11 å Push the SMALL UPRIGHT (K) onto the SMALL LONG WOOD DOWELS in the RIGHT UPRIGHT (B). Page 15...
- Page 16 Step 12 å Insert two WOOD DOWELS (3) into the exact holes shown in the UPRIGHTS (B and C). å Fasten the BOTTOM (E) to the END (A). Tighten two HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the UPRIGHTS insert into the holes in the BOTTOM.
- Page 17 Step 13 å Insert two SMALL WOOD DOWELS (5) into the SMALL UPRIGHT (K). å Insert three WOOD DOWELS (3) into the SHELVES (F and G) and BOTTOM (E). å Fasten the END (A) to the SHELVES (F and G) and BOTTOM (E). Tighten six HIDDEN CAMS. å...
- Page 18 Step 14 å Fasten the BOTTOM FRAME (M) to the ENDS (A). Use four SILVER 1-3/16" MACHINE SCREWS (10). SILVER 1-3/16" MACHINE SCREW (4 used in this step) Page 18...
- Page 19 Step 15 å Carefully stand your unit upright. Pro Tip: Lift with your å Fasten the BRACES (L) to the ENDS (A). Use eight SILVER legs. And, you know, 1/2" PAN HEAD SCREWS (12). your arms. SILVER 1/2" PAN HEAD SCREW (8 used in this step) Page 19...
- Page 20 Step 16 å NOTE: You may need someone's help in this step. Caution å First, fill the exact holes shown in the ENDS (A) and Inspect the parts thoroughly before assembling. Disassembly of glued UPRIGHTS (B and C) 1/4 to 1/2 full with GLUE (15). Then, parts is extremely difficult.
- Page 21 Step 17 å Fasten a KNOB (7) to the DRAWER FRONT (N). Use a SILVER 11/16" MACHINE SCREW (16). å Repeat this step for the remaining KNOBS and DRAWER FRONTS. SILVER 11/16" MACHINE SCREW (6 used for the KNOBS) Page 21...
- Page 22 Step 18 å Slide a DRAWER BOTTOM (P) into the grooves in two DRAWER SIDES (O). å Fasten two DRAWER FRONTS (N) to the DRAWER SIDES (O). Tighten eight HIDDEN CAMS. å NOTE: Be sure the DRAWER BOTTOM inserts into the grooves in the DRAWER FRONTS.
- Page 23 Step 19 å Insert the DRAWERS into each location shown in your unit. å Peel APPLIQUES from the APPLIQUE CARD (8) and stick them onto each visible HIDDEN CAM. å NOTE: Please read the back pages of the instruction booklet for important safety information. å...
- Page 24 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded drawers and shelves. •...