Viavi OneExpert ONX CATV User Manual page 46

ONX Demo mode (Simulator Settings)
Enable Demo mode:
✓ The unit is switch off
✓ Press and hold the Tray key
✓ Press shortly the Power on key
✓ Hold the Tray key until the four top led
are orange → takes about 3sec
OneExpert
Sync Network Error Batt
✓ Release the Tray key
✓ Go in CATV setting and select
Engineering Utilities
✓ Select "Use Simulator"
✓ Reboot the unit
Disable Demo mode:
✓ The unit is switch off
✓ Press and hold the Tray key
✓ Press shortly the Power on key
✓ Hold the Tray key until the four top led are
✓ Release the Tray key
✓ Go in CATV setting and select
✓ Unselect "Use Simulator"
✓ Reboot the unit
viavisolutions.com
orange → takes about 3sec
Utilities
© 2020 VIAVI Solutions Inc.
Engineering
46