Advertisement
BER channel extension configuration examples
ONX CATV Settings
→ Digital Measurement Settings
For Channel Check only
➔ not linked with OneCheck BER Channel Extension
See
OneCheck BER Measurement resolution Setup
StrataSync Configuration and Settings
Limit Plan → OneCheck BER Failure Limits
1.0e-7
If "Measure BER 1.0E-9" is disable,
then enable "Extent BER Testing
within Uncertainty Band"
(and vice-versa).
If both are not checked, then ONX
measure BER based on 10E08 bits
and the best BER value
displayed will be 10E-08.
Default is Disabled / False
→ so current testing will not
be altered without intent
False ➔ Possible to
change the settings
on ONX
viavisolutions.com
True ➔ Not possible
to change the
settings on ONX
© 2020 VIAVI Solutions Inc.
107
Advertisement
