Setting Field View Telemetry Receive Frequency
192 –
✓
An HSM connected to PathTrak at the headend is required for Field View
✓
The HSM sends a telemetry signal downstream for field devices, like the
ONX or DSAM, providing visibility of the return spectrum remotely
✓
The telemetry receive frequency is entered on the ONX by pressing the
Configure button then selecting "Configure Telemetry"
✓
This will bring up an entry box where the telemetry frequency can be
entered
✓
Field View Telemetry can be also entered via CATV Settings:
viavisolutions.com
192
© 2020 VIAVI Solutions Inc.