SmartID Registration via USB port
Select Locate IDs or Coax Check in menu "Full Sweep Coax – Smart ID"
❺
Press Actions soft key
❻
Select SmartID Registration
❼
Power ON & connect the SmartID Plus to ONX via the USB cable
❽
Select the letter on ONX display that corresponds to the label on the SmartID.
❾
The serial number should be auto populated when SmartID is powered ON
If the Smart ID is a Plus one, check the box for "Bluetooth Master" and press OK
❿
❻
❺
❽
❼
viavisolutions.com
USB
A
Cable
B
❾
❿
© 2020 VIAVI Solutions Inc.
132