HPE ProLiant ML30 Generation9 Quickspecs page 6

QuickSpecs
Standard Features
power supply options have been designed specifically for HPE ProLiant Gen9 Essential Series servers.
The HPE 350W FIO Power Supply is the standard, non-redundant AC power supply option for most HPE
ProLiant Gen9 Essential servers. It features Bronze-level (85%) certified power efficiency with a set of
features optimized for the Gen9 Essential-series rack and tower servers.
The HPE 460W (Redundant) AC Power Supply can be configured with redundancy enablement kit to
support power redundancy in ProLiant ML30 Servers, providing additional protection against power loss.
With an 80 Plus Gold power efficiency rating (up to 92%), this power option helps to reduce operating
expenses while protecting against trapped power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper
cord is also included with each standard AC power supply option kit. If a different power cord is required,
please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool
located at http://www.hpe.com/info/hppoweradvisor.
Power Specification and Technical Content for supported power supplies can be found at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111541.
Required Cabling
Server Power Cords
The ProLiant ML30 server is a tower server that ships standard with a 6 country specific NEMA power
cord that allows connection to wall outlets in a home or office. If customers require additional local power
cords, they can check the power cord matrix for the appropriate country specific SKU.
System Fans
One of the following
depending on model
Interfaces Video
Network RJ-45 (Ethernet)
Micro SD Slot
NOTE: The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a Micro-
SD card into the Micro-SD slot while the server is powered.
USB 3.0
USB 2.0
Operating Systems Microsoft Windows Server
and Virtualization
Red Hat Enterprise Linux (RHEL)
Software Support for
SUSE Linux Enterprise Server (SLES)
ProLiant Servers
VMware
ClearOS
NOTE:
It is available via CTO preload, Intelligent Provisioning or via download. For more information on
ClearOS, please visit http://www.hpe.com/servers/clearos.
NOTE: VMWare availability is dependent on General availability from the vendor. HPE ProLiant ML30
supports VMWare 5.5 U3 and 6.0 U1.
NOTE: For more information on HPE's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit our
1P model system fan
1P model PCIe fan
1 (rear)
2 (1 shared for HPE Integrated Lights-Out)
1 (internal)
6 (4 front, 2 rear)
4 (2 rear, 1 internal standard USB, 1 internal USB header)
ClearOS allows you to build a fully functional server that is just right for you at no upfront cost.
Non-redundant
One (1) Non-redundant system fan
Non-redundant
One (1) Non-redundant PCIe fan
HPE ProLiant ML30 Generation9 (Gen9)
Redundant
NA
Redundant
NA
Page 6