HPE ProLiant ML30 Generation9 Quickspecs page 29

QuickSpecs
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HPE Standard Memory
HPE Standard Memory is unique technology which is designed to work on 10/100 series Rack and Tower server. In Gen9 Server
HPE Standard Memory has passed HPE's rigorous qualification and test processes. HPE Standard Memory is a certified HPE
options and will provide a platform to allow future memory-related support enhancements through HPE Active Health System,
System Insight Management and Insight Control management software.
DDR4 memory population guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:
http://www.hpe.com/servers/ddr4memoryconfig.
Memory Population
guidelines
General Memory Population Rules and Guidelines:
. The HPE ProLiant ML30 Gen9 Server has four memory slots
. There are two channels per server with two DIMM slots per channel
. Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
. Memory channel 2 consists of the two (2) DIMMs that are furthest from the processor
. Support for single/dual-rank 2133 MT/s ECC UDIMM (unbuffered DIMMS)
. The server supports up to 64 GB (4 x 16-GB) for Unbuffered DIMMs
. No support for LRDIMMs; RDIMMs; Non-ECC UDIMMs
. Do not install DIMMs if the processor is not installed
. Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank)
. Non-ECC DIMMs are not supported
. Always use HPE qualified DIMMs
HPE ProLiant ML30 Generation9 (Gen9)
Page 29