Nvidia Spectrum-2 SN3000 1U User Manual page 52

• 2x Rack mount rails (A)
• 2x Rack mount blades (B)
• 8x M6 Standard cage nuts¹ ² and 8x M6 Standard pan-head Phillips screws¹ (C)
• 4x Phillips100 DEG F.H TYPE-I ST.ST 6-32 X 1/4 screw with around patch (D).
¹ Other threads are available by special order: M5, 10-32, 12-24. ² G-type cage-nut is available
by special order.
Rack Rail Kit Parts
Prerequisites
Before mounting the system to the rack, select the way you wish to place the system. Pay attention
to the airflow within the rack cooling, connector and cabling options.
While planning how to place the system, consider the two installation options shown in
the Installation Options figure below, and review the following points:
• Make sure the system air flow is compatible with your installation selection. It is important to
keep the airflow within the rack in the same direction.
• Note that the part of the system to which you choose to attach the rails (the front panel
direction, as demonstrated in Option 1 or the FRUs direction, as demonstrated in Option 2)
will determine the system's adjustable side. The system's part to which the blades are
attached, will be adjacent to the cabinet.
A
C X 8
B
D X 4
52