３−２ System Test Mode; ３−３ Game Test Mode - Sega Derby Owners Club World Edition Service Manual

3 − 2 SYSTEM TEST MODE
The BOOKKEEPING area of the System Test Mode displays no game-
related data. For product data, refer to the BOOKKEEPING area of each
satellite.
System Test Mode can be used to check IC Board functioning, adjust the monitor, and change
coin settings.
Refer to the Naomi Service Manual for details. However, be sure to employ the settings outlined
below for this product.
● CABINET TYPE：
● MONITOR TYPE：
● SERVICE TYPE：
● COIN CHUTE TYPE： COMMON
Coin settings are set at the factory in the same way as satellites, but the coin settings for the
main projection unit have no effect on the game no matter what the setting. (See 4-2)
For the ADVERTISE SOUND item, fanfare and other sound will be output whether the item is
set to ON or OFF.
3 − 3 GAME TEST MODE
Ａ . TEST MENU SCREEN
Select GAME TEST MODE from the System Menu screen to display the Game Test Menu
screen (shown below).
Press the SERVICE Button until the pointer is pointing to the desired item, then press the TEST
Button to enter the test for the selected item.
ＳＥＬＥＣＴ ＷＩＴＨ ＳＥＲＶＩＣＥ ＢＵＴＴＯＮ
FIG. 3. 3 a TEST MENU Screen
After the test is complete, move the pointer to EXIT and press the TEST Button to return to the
System Menu screen.
1 PLAYER(S)
HORIZONTAL
COMMON
ＤＥＲＢＹ ＯＷＮＥＲＳ ＣＬＵＢ ＷＥ
ＴＥＳＴ ＭＥＮＵ
ＩＮＰＵＴ ＴＥＳＴ
ＯＵＴＰＵＴ ＴＥＳＴ
ＧＡＭＥ ＡＳＳＩＧＮＭＥＮＴＳ
ＢＯＯＫＫＥＥＰＩＮＧ
ＣＯＵＲＳＥ ＲＥＣＯＲＤ ＣＬＥＡＲ
ＢＡＣＫＵＰ ＤＡＴＡ ＣＬＥＡＲ
−＞ＥＸＩＴ
ＡＮＤ ＰＲＥＳＳ ＴＥＳＴ ＢＵＴＴＯＮ
− 13 −