Safety Instructions - Waters Shaker+ Care And Use Manual

[ CARE AND USE MANUAL ]

Safety instructions

Do not touch moving parts during operation!
The user must never put their ngers or any objects on and
around the moving platform.
• The device must always be completely switched o (cables removed)
before moving it.
• The device must be handled with caution as it contains moving parts.
• The user must maintain a distance of at least 20cm from the product
(WiFi antenna) while it is being installed and operated.
• The device is intended for indoor use only.
• Device maintenance has to be done exclusively by a Waters representative.
• If the device is used in a manner not speci ed by the manufacturer,
the protection provided by the device may be impaired.
• All the input/output ports are Safety Extra Low Voltage (SELV) circuits.
SELV circuits should only be connected to other SELV circuits.
• To avoid damaging the unit, do not remove labware from the device if
the device's clamps are closed. If the device's clamps are closed onto a
labware and the device is OFF, the device must rst be turned ON.
The clamps will automatically open upon device initialization and will
thus release the labware.
• Non-slip pads are positioned below each Shaker+ Device. If any of these
pads are damaged or have been removed, they must be replaced with a
new set of pads to avoid damaging Shaker+ units.