Quick Reference Table - Supermicro A+ Server AS -1015SV-WTNRT User Manual

Quick Reference Table

Jumper Description
JBT1 Clear CMOS
JPL1 LAN enable/disable
JSATA1 Hybrid MCIO select for JMCIO4
JSATA2 Hybrid MCIO select for JMCIO5
UID SW Unit ID switch (push-button toggle switch ON/OFF)
LED Description
LEDBMC BMC Heartbeat
LED8 Power LED
LED9 UID LED
Connector Description
Battery (BT1) Onboard CMOS battery
COM 1 Rear panel COM port 1
FAN 1~6 System cooling fan headers
JF1 Front control panel
JIPMB1 4-pin external BMC I2C header (for an IPMI card)
JL1 Chassis intrusion header
JPI2C1 PWR supply (I2C) System Management Bus
JPWR1 24-pin ATX power supply connector
JPWR2 12V 8-pin ATX CPU power connector
JSXB1A, JSXB1B,
Slots for Supermicro riser cards
JSXB1C, JSXB2
JTPM1 Trusted Platform Module (TPM)/Port 80 connector
LAN1, LAN2 Back panel LAN1, LAN2 connectors
M.2-C1, M.2-C2 M.2 slots
NVMe0~5 NVMe slots 0~5
USB 0/1 (3.0) Back panel USB 3.0 ports (USB 0/1)
USB 2/3 (3.0) Back panel USB 3.0 ports (USB 2/3)
USB 4/5 (3.0) Internal USB 3.0 header (USB 4/5)
VGA Back panel VGA port
Note: Note: Jumpers, connectors, switches, and LED indicators that are not described in the
Jumpers, connectors, switches, and LED indicators that are not described in the
preceding tables are for manufacturing testing purposes only, and are not covered in this preceding tables are for manufacturing testing purposes only, and are not covered in this
manual. manual.
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Auto)
Pins 1-2 (Auto)
Off
Status
Blinking: BMC Normal/Working
On: Power On
Blue: UID Activated
18
Chapter 1: Introduction