Headers And Connectors - Supermicro A+ Server AS -1015SV-WTNRT User Manual

4.2 Headers and Connectors

Onboard Fan Headers (FAN1~FAN6)
There are six fan headers on the motherboard. These are 4-pin fan headers; pins 1-3 are
backward compatible with traditional 3-pin fans. The onboard fan speeds are controlled
by Thermal Management (via Hardware Monitoring) in the BMC. When using Thermal
Management setting, please use all 4-pin fans.
Disk-On-Module Power Connector (JSD1 & JSD2)
The Disk-On-Module (DOM) power connector at JSD1 provides 5 V power to a solid-state
DOM storage device connected to one of the SATA ports. See the table below for pin
definitions.
SATA (SATA16, SATA17)
The H13SVW-NT has two available SATA 3.0 ports (SATA16 and SATA17). These are
standard SATA 3.0 ports.
Chapter 4: Motherboard Connections
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 +12 V (Red)
3 Tachometer (Yellow)
4 PWM Control (Blue)
DOM Power
Pin Definitions
Pin# Definition
1 5 V
2 Ground
3 Ground
SATA Connectors
Pin Definitions
Pin# Definition
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
54