Supermicro A+ Server AS -1015SV-WTNRT User Manual page 23

Installing the Outer Rails
1. Measure the distance from the front rail of the rack to the rear rail of the rack.
2. Attach a short bracket to the rear side of the right outer rail, and a long bracket to the
front side of the right outer rail as shown above on the right.
3. Adjust the short and long brackets to the proper distance so that the chassis can snugly
fit into the rack.
4. Secure the rails to the cabinet with screws. Repeat steps 1-4 for the left outer rail.
Figure 2-2. Extending and Mounting the Outer Rails
Figure 2-3. Installing the Outer Rails to the Rack
Chapter 2: Server Installation
Slide the long bracket into the short bracket
Adjust the distance between the brackets
23