Supermicro A+ Server AS -1015SV-WTNRT User Manual page 24

Installing the Rail Assemblies to the Rack
1. After you have installed the short and long brackets to the outer rails, you are ready to
install the whole rail assemblies (outer rails with short and long brackets attached) to the
rack. (See the previous page.)
2. Use M5 screws and washers to secure the rail assemblies into the rack as shown
below.
Figure 2-4. Securing the Rail Assemblies to the Rack
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Chapter 2: Server Installation
24