Din-Rail Mounting - Siemens SIMATIC FDE Gateway V1.1 Equipment Manual

5.9.3

DIN-rail mounting

Mounting
Requirement
One 35 mm standard profile DIN rail is mounted at the installation location.
Process
1. Place the device with the rail clamp at the marked position on the upper edge of the DIN rail.
Press the device downwards.
2. Swivel the rail clamp of the device from below over the DIN rail.
3. Press the device towards the DIN rail. Press the DIN rail clamp in so that the device is firmly
seated on the rail.
SIMATIC FDE Gateway V1.1
Equipment Manual, 12/2023, A5E52683268-AE
Installing and connecting a device
5.9 Installing the device
23