VC2COMMA (208V or 240V)
4.4 Mounting the VersiComm
Note: It is strongly recommended that the installer complete Section 5:
Commissioning/Operation before mounting the device in its selected site. This will allow the
user to ensure functionality of the entire system while it is easily accessible.
Due to the variety of installation locations and mounting options, it is left up the installer to
choose the best method for mounting the VersiComm; however, it is recommended that the
VersiComm be located above the chargers and that the antennas have no external obstructions.
A key is provided for the DIN 3mm lock on the front of the unit. If this part is lost, it is the owner's
responsibility to procure a new key. The part number for the key is LSK503 and it is a common
part. The key can be ordered from the following website:
https://www.eldon.com/LSK503-en_US-
Key_for_DIN_3mm_lock.aspx
Unrestricted
14
©
2019 Siemens Industry, Inc.
814205 Rev02