Software and commissioning
6.3 Network settings
Selecting the mode and language
There are three icons in the top bar of the application:
Use the
You can find the user information below the
Switch the language with the
6.3
Network settings
The data from the brownfield level is acquired via digital or analog input, or USS (RS232). This
data is then transferred via LAN or Wi-Fi.
Under Network settings, set the parameters for the two Industrial Ethernet ports and for the
Wi-Fi connection.
LAN settings
Open the LAN tab. There are two ways to provide the IP address:
• Manually: The parameters are entered manually and, if necessary, coordinated with the
network administrator. The lines with asterisks must be completed.
– The toggle button for enabling the automatic setting is set to off.
– Fill in the "IP address" field with the address for ETH1 (X1).
– Complete the fields "Subnet mask", "Gateway" and "DNS".
– Save the configuration by clicking the "Save" button in the upper right corner.
42
icon to activate Dark mode.
icon.
icon.
Equipment Manual, 12/2023, A5E52683268-AE
SIMATIC FDE Gateway V1.1