Table of Contents
Advertisement
• Connection cable on the back of the appliance should be
led in such way that it does not touch the appliance back
wall, as this part will get very hot during operation.
L1
NOTE:
Connection bridges are already installed on their
respective places on the clip. Screws of the connection
terminals are open, which means they do not have to be
unfastened or unscrewed any further. When fastening the
screws, you may hear a slight 'click', which means that the
screws should be fastened / screwed in completely.
The following can be used for connection:
• Type H05 RR-F 4×1.5 rubber connection cables with a
green-yellow protective wire,
• Type H05 VV-F 4x1,5 PCV isolated connection cables
with yellow-green protective wire, or other equivalent or
superior grade cables.
230V~
N
PE
19
Advertisement
Table of Contents
